BOE-THERM DTE 19,3 - 32,1 kW

The BOE-THERM DTE consists of components from the standard production range of well-known suppliers. All building elements are fitted in such a way that they are not only easily accessible but also easily exchangeable. Careful selection, calculation and set-up of the components is achieved using computer programmes DTE designed especially for this purpose. In this way DTE houses the maximum cooling capacity in a minimum of space.
In the BOE-THERM DTE only durable materials are used. DTE leaves nothing to chance and chooses knowingly for a robust housing fitted with stainless steel foot mounts. These foot mounts are provided with M12 thread holes at the underside to enable direct mounting onto customer's steelwork.
The insulated stainless steel water tank in the BOE-THERM DTE is sealed tight to prevent any possible algal growth caused by the incidence of light.
Furthermore, the warm air produced by the condensers does not remain in the BOE-THERM DTE, but is blown out directly by powerful axial fans.
These important BOE-THERM DTE constructional features guarantee the long life of the BOE-THERM DTE.

The BOE-THERM DTE  includes the following components:

ü  heat exchanger (evaporator) made of stainless steel corrugated plates,
ü  digital temperature controller with adjustable limitation and display for reading out measured values,
ü  a pressure limited thermostatic expansion valve,
ü  an industrial multi-stage centrifugal pump with impellers, shaft and other key components made of stainless steel,
ü  by-pass for water pump protection,
ü  hermetically sealed and suction gas cooled compressor, protected at high and low pressure by a pressostat,
ü  an air-cooled condenser specially designed by DTE, fitted with copper pipes and aluminium fins,
ü  industrial axial fans which directly blows the hot condenser air horizontally to outside,
ü  a closed water tank make of stainless steel, which also has been provided with insulation, a float for automatically refilling, manual filling device, and sight glass,
ü  Water tank level alarm, (machine will switch off),
ü  a switch box provided with all necessary protections,
ü  connection for external start/stop (Volts-Free Contact).

A = Cooling water inlet, 1¼” BSP outside thread         G  = Control panel

B  = Cooling water outlet, 1¼” BSP outside thread      H = Ingoing condenser air

C = Drain, ½" BSP inside thread                               I  = Service panel / Switch Box door

D₁= Filling water inlet, ½” BSP outside thread            K = Outgoing condenser air

D₂= Manual filling device                                        L  = Stainless steel foot mounts, 2 pieces

E = Overflow water tank, ½" BSP outside thread         P = Sight glass

Besides the BOE-THERM DTE standard programme, DTE also offers customized BOE-THERM DTE’s which are calculated and built according to your specifications. The modular construction of the BOE-THERM DTE allows fast and simple adaptation to your specifications. BOE-THERM DTE has almost all components for extra features available from stock.