BOE-THERM DTE 1,0 - 4,9 kW

The BOE-THERM DTE consists of components from the standard production range of well-known suppliers. All building elements are fitted in such a way that they are not only easily accessible but also easily exchangeable. Careful selection, calculation and set-up of the components is achieved using computer programmes BOE-THERM DTE designed especially for this purpose. In this way BOE-THERM DTE houses the maximum cooling capacity in a minimum of space.

In the BOE-THERM DTE only durable materials are used. BOE-THERM DTE leaves nothing to chance and chooses knowingly for a robust housing fitted with rubber legs. These legs are easily removable to enable direct mounting onto customers steelwork.

The insulated stainless steel water tank in the BOE-THERM DTE is sealed tight to prevent any possible algal growth caused by the incidence of light. Furthermore, the warm air produced by the condenser does not remain in the BOE-THERM DTE, but is blown out directly by a powerful axial fan. These important BOE-THERM DTE constructional features guarantee the long life of the BOE-THERM DTE.

The BOE-THERM DTE includes the following components:

• Tube-coil heat exchanger (evaporator) made of stainless steel,
• digital temperature controller with adjustable limitation and display for reading out measured values,
• a pressure limited thermostatic expansion valve, (except. K-001.0 en de K-001.7 capillaire injection)
• an industrial multi-stage centrifugal pump with impellers, shaft and other key components made of stainless steel,
• by-pass for water pump protection,
• hermetically sealed and suction gas cooled compressor,
• an air-cooled condenser specially designed by DTE, fitted with copper pipes and aluminium fins,
• an industrial axial fan which directly blows the hot condenser air horizontally to outside,
• a closed water tank make of stainless steel, which also has been provided with insulation, a float for automatically refilling, manual fillingdevice, and sight glass,
• a switch box provided with all necessary protections,
• connection for external start/stop (Volts-Free Contact).
• All connections on the back of the machine, no hoses or cables are visual

Options

Besides the BOE-THERM DTEstandard programme, BOE-THERM DTE also offers customized BOE-THERM DTE’s which are calculated and built according to your

specifications. The modular construction of the BOE-THERM DTE allows fast and simple adaptation to your specifications. BOE-THERM DTE has almost all

components for extra features available from stock.

Some of these are:

􀀹 full compliance with the country dependent standards and regulations,

􀀹 adaptation to all voltages and frequencies,

􀀹 housing fitted with wheels instead of rubber legs,

􀀹 adaptation to extreme environmental conditions,

􀀹 temperature adjustment and/or readable by remote control,

􀀹 protection against run-dry circulation pump,

􀀹 condenser for external set-up,

􀀹 integration of water-cooled condenser instead of an air cooled condenser,

􀀹 water piping in copper or stainless steel.

The BOE-THERM DTE is a complete and plug-in type of BOE-THERM, DTE product which fully meets all European directives, safety, and quality standards, such as

CE, EN 292, EN 1050, EN 60204, EN 378 and PED directive 97/23/EG. All BOE-THERM DTE products are developed and constructed in accordance with ISO 9001. Standard documentation supplied with all machines: Pressure test certificate, refrigeration charge/evacuation certificate, leakage testing approval, system check certificate, instruction card and a machine operating and maintenance manual. All certificates issued in conformance with European and local laws governing construction of refrigeration.